Safran SecureSync 2400 User Manual page 90

2.14 Configure Network Settings
74
The Actions panel provides:
General Settings: Allows quick access to the primary network set-
tings necessary to connect SecureSync to a network. See
Network Settings" on the facing
Web Interface
Web interface timeout: Determines how long a user can stay
logged on. For more information, see
page 282.
Web Security
use TLS below v1.3 (to prevent known security vulnerabilities).
Access Control: Allows the configuration of access restrictions from
assigned networks/nodes.
Login Banner: Allows the administrator to configure a custom banner
message to be displayed on the SecureSync Web UI login page and
the CLI (Note: There is a 2000 character size limit).
SSH: This button takes you to the
setting up SSH, see
System Time Message: Setup a once-per-second time message to be
sent to receivers via multicast. For details, see
sage" on page 111.
VLAN: This button will reveal the
more information, see
page.
Settings:
Level: High security will not allow browsers to
SSH Setup
"SSH" on page 92.
VLAN Setup
"VLAN Support" on
CHAPTER
"Web UI Timeout" on
window. For details on
"System Time Mes-
popup window. For
page 111.
•
2 SecureSync 2400 User Manual Rev. 5.2
"General