Safran SecureSync 2400 User Manual page 222

3.3 Managing References
Accessing the Reference Priority Screen
To access the Reference Priority Setup screen:
1. Navigate to
OR:
1. On the
2. The
The Reference Priority screen is divided into 3 areas:
206
MANAGEMENT > OTHER: Reference
HOME screen, click the GEAR icon in the
Configure Reference Priorities
a. The Actions panel, which provides a single action:
Restore Factory Defaults
b. The Configure Reference Priorities
SecureSync's references in a table form.
In this panel you can:
Add and configure new references
Delete references
Enable/disable references
Note: It is also possible to disable and enable References via the
front panel display. Navigate to
select the reference you would like to enable or disable using the
ENTER key. You will then be able to edit the STATE to either on or
off. To confirm you choice, press the ENTER key Press ENTER
again in the confirmation menu.
Reorder the priority of SecureSync's references
c. The Reference Status
The Reference Status
status of the SecureSync's references. It is the same as the
ence Status
screen will display.
panel, which displays the priority of
panel
panel provides a real time indicator of the
panel on the HOME screen of the Web UI.
CHAPTER
Priority.
Reference Status
Inputs Menu > Settings and
•
3 SecureSync 2400 User Manual Rev. 5.2
panel:
Refer-