Web Ui Timeout - Safran SecureSync 2400 User Manual

4.3 Managing Users and Security
After resetting the password follow the procedure above to change the spadmin
password in the MANAGEMENT > OTHER: Authentication window.
4.3.3

Web UI Timeout

For security reasons, the Web UI will automatically timeout after a set number of
minutes, i.e. you will be logged out by the system, regardless of activity, and need
to actively login again.
To change the time after which the Web UI will timeout:
1. Navigate to the
2. In the
3. In the
In order for a new setting to take effect, you need to log off, and then log back in
again. This setting affects all users, not just the user changing the value.
282
Minimum timeout duration: 10 minutes
Maximum timeout duration: 1440 minutes (24 hours)
Default timeout duration: 60 minutes.
MANAGEMENT > Network Setup
Actions panel on the left, click on
Web Interface Settings
Note: The Web UI does not allow simultaneous logins. Any sub-
sequent logins will discontinue any prior instances of the Web UI.
screen.
Web Interface
window, enter the desired value in minutes.
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
Settings.