2.14.10.1 System Time Message Format - Safran SecureSync 2400 User Manual

2.14 Configure Network Settings
This time message will be transmitted before every 1PPS signal, and can be used
to evaluate accuracy and jitter.
To set up and enable a System Time Message:
1. Navigate to
2. Populate the fields
3. In the

2.14.10.1 System Time Message Format

This message contains the time when the next 1PPS discrete will occur. It is sent
once per second prior to the 1PPS discrete.
Table 2-4:
Word
1
2
3
4
5
112
MANAGEMENT
System Time Message. The
Multicast
click Submit.
Network Services
System Time Message format
Byte 3 Byte 2
Msg ID
Msg Size
Seconds
nSec
EOM
> Network Setup > Actions
Settings window will open.
Address, Port Number
panel, enable System Time
Byte 1 Byte 0
CHAPTER
panel, and select
and Message
Message.
•
2 SecureSync 2400 User Manual Rev. 5.2
ID, and