Safran SecureSync 2400 User Manual page 472

APPENDIX
Pin No.
11
12
13
Table 5-19:
STANAG Output: Edit Window
To configure a STANAG output, go to its Edit window. For instructions, see:
figuring Option Card Inputs/Outputs" on
The Web UI list entries for these cards are: STANAG Out and STANAG Out, Isol-
ated.
The outputs are named: Stanag HQ Output [number].
The Edit window allows the configuration of the following settings:
456
Signal Function
TOD1 TOD1 TTL Out
GND Ground
TOD2 TOD2 TTL Out
Models 1204-11, -25: DB-25 pin-out
Note: SecureSync starts numbering I/O ports with 0 (only 1PPS and
10 MHz outputs start at 1, because of the built-in outputs).
Pin No. Signal
24 1PPS 1PPS TTL Out
25 GND Ground
page 364.
Function
"Con-
SecureSync 2400 User Manual