Safran SecureSync 2400 User Manual page 428

APPENDIX
Figure 5-29:
Configuring a Square Wave Output
To configure one of the Square Wave Outputs:
1. Navigate
412
Programmable Period: 100 ns to 2,000,000,000 ns in 5ns steps, or to
1,800,000,000 μs in 1μs steps
Programmable Pulse
Maximum Number of
Ordering Information: 1204-17: Square Wave Out
Model 1204-17 option card rear plate
INTERFACES >OUTPUTS: Square Wave
the right side of the screen displays all
All outputs are numbered by signal type (e.g., 'pulse'), hence the numbering
may not start with 0.
To determine which output number is allocated to which connector
(J1–J4), hover your mouse pointer over the
Click on the INFO button next to one of the outputs to open a
Width: 20 ns to 900 ms with 5 ns resolution
Cards: 6
Sqr. Wv. Outputs
Output. The panel on
and their statuses.
back panel image.
SecureSync 2400 User Manual