Safran SecureSync 2400 User Manual page 164

2.15 Configure NTP
Prior to Expert mode being enabled, the Network: NTP Setup page will contain
various tabs for configuring different options of the NTP Service. To prevent inad-
vertent changes from being made to a user-edited NTP.conf file via the web
pages, these NTP configuration tabs are removed from the web browser view as
long as the Expert mode remains enabled (only the Expert Mode tab is visible in
Expert Mode; all other tabs will no longer be present). Disabling the Expert mode
restores these tabs to the Edit NTP Services window.
To enable the Expert Mode, and edit the NTP.conf file:
1. Navigate to
2. In the
3. Click the
4. Confirm by clicking
5. Click the GEAR icon.
6. In the
7. Click the Submit button to save any changes that were made.
8. Disable and then re-enable the NTP service using the
148
MANAGEMENT > NETWORK: NTP
NTP Services
When enabled, the NTP Service operates in Unicast mode. In Unicast mode,
the NTP Service responds to NTP requests only. The NTP Service supports
a broadcast mode in which it sends a NTP time packet to the network
broadcast address.
Expert Mode
OK
Edit NTP Services
under the Expert Mode
in the NTP Services
figuration per the manually edited file.
Caution: Any configurations made in
soon as NTP Expert Mode
panel locate the Expert Mode
switch.
in the dialog box.
window, edit the file as desired in the text box
tab.
panel. SecureSync will now use the new NTP con-
is disabled.
CHAPTER
Setup.
switch:
NTP ON/OFF
NTP Expert Mode will be lost as
•
2 SecureSync 2400 User Manual Rev. 5.2
switch