Safran SecureSync 2400 User Manual page 251

Hide thumbs Also See for SecureSync 2400:

Table of Contents

Available GNSS Receiver Dynamics Settings

The following Receiver Dynamics settings are available:

The following table illustrates the interdependence between Receiver Dynamics,

Receiver Mode (see

Single Satellite

SecureSync 2400 User Manual Rev. 5.2

3. To change the setting, click Edit in the bottom-left corner. The GNSS 0 con-

figuration window will display:

4. Select a setting and click Submit.

(Resurvey): [default]

When used with the Mobile Receiver Mode, the receiver is adjusted for typ-

ical dynamic land-based applications.

When used with the Standard Receiver Mode, this setting also will auto-

matically initiate a resurvey after SecureSync reboots, in order to account

for a possible relocation.

Sea: The receiver dynamics will be optimized for mobile motion patterns

typical with marine applications, resulting in greater timing accuracy, and

avoiding premature loss of synchronization.

Air: The receiver dynamics will be optimized for acceleration forces typ-

ically experienced in civil aviation applications.

Stationary (No

Resurvey): In Standard Mode, the receiver is set to a non-

dynamic value for stationary applications.

There will be no automatic resurvey after a reboot. Should a unit be relo-

cated, you need to delete its position, thus initiating a new survey.

"Selecting a GNSS Receiver Mode" on

Receiver dynamics, ~modes, ~ dynamics, ~ types

Receiver Mode

Receiver Dynamics

3.3 Managing References

page 231) and receiver

Troubleshooting