Restoring The System Configuration - Safran SecureSync 2400 User Manual

4.7 Backing-up and Restoring Configuration Files
3. Click
4. Click the
5. To use the new configuration file for this SecureSync, click the
4.7.4

Restoring the System Configuration

To restore the System Configuration:
1. Navigate to
2. In the
3. Click
344
Choose File in the window that displays, and navigate to the dir-
ectory on your PC where the bundled file is stored.
Upload button. SecureSync saves the uploaded bundled file in the
/home/spectracom/xfer/config/directory.
Note: When uploading files remotely via long distances, or
when uploading multiple files via several browser windows sim-
ultaneously, the upload process may fail to complete. In this
case, cancel the upload by clicking X, and go back to Step 2.
figuration button, and follow the procedure described under "Restoring
the System Configuration" below.
TOOLS > SYSTEM:
Actions panel, click
OK in the grey confirmation window. The system will restore the con-
figuration using the bundled file stored at /home/spec-
tracom/xfer/config/SecureSync.conf, then reboot in order to read the
Upgrade/Backup.
Restore Configuration.
CHAPTER •
4
Restore Con-
SecureSync 2400 User Manual Rev. 5.2