Safran SecureSync 2400 User Manual page 75

Hide thumbs Also See for SecureSync 2400:

Table of Contents

CLI Hot Swap Monitoring

Functionality and status of the Hot Swap Power Supplies can also be obtained by

using the CLI command HS_GetStatus.

This command will return the overall Hot Swap status and total current, as well as

the status and details for each of the bays (health status, present, power type, fan

speed, temp, voltage, current, percentage).

Front Panel Hot Swap Monitoring

If your unit is configured with hot swappable power supplies, an additional menu

will be visible on the front panel OLED information menu.

SecureSync 2400 User Manual Rev. 5.2

Voltage graph

Current graph

Fan Speed graph

Temperature graph

Menu button (you will need to pres twice if the first

press was waking up the display on the front panel).

Press the right button to highlight the Hot Swap sub-menu:

Press the down button to toggle between specific information for Bay 1 and

In the case of faulty power supplies, the front panel will flash on the import-

ant parameter(s) to indicate the need for attention (in the image above, the

issue on Bay 2 is with the fan speed and voltage).

You can also disable monitoring on a specific bay by pressing the

ENTER key while the bay is highlighted. Bays with disabled monitoring will

be noted on the front panel:

2.9 Connecting Supply Power

Troubleshooting