Table of Contents
Advertisement
2.3 Required Tools and Parts
2.3
Required Tools and Parts
Depending on your application and system configuration, the following tools and
parts may be required:
2.3.1
Required GNSS Antenna Components
Should you plan on using a GNSS reference with your SecureSync, you will also
need the following items (sold separately):
For antenna installation guidelines, see the separate documentation shipped with
the antenna components.
44
Purchased optional equipment (note that option cards listed on the pur-
chase order will be pre-installed in the unit). See
tification" on page 20
Phillips screwdrivers to install the rack-mount ears, and to mount the unit in
a 19"-rack
Ethernet cables (see
Antenna cable with SMA connector, or conversion cable
Note:
The SMA-to-N-type conversion cable included in the
ancillary kit is approved for pull weight of up to 60 lbs. If you
are using a heavier cable, you will need to apply appropriate
strain relief.
GNSS antenna with mounting bracket
GNSS antenna surge suppressor (recommended)
GNSS antenna inline amplifier (optional for short cable lengths)
and
"Option Cards Overview" on
"Connecting Network Cables" on
CHAPTER
"Option Card Iden-
page 17.
page 51).
•
2
SecureSync 2400 User Manual Rev. 5.2
Advertisement
Table of Contents
Troubleshooting
