Safran SecureSync 2400 User Manual page 313

While
(unless you require the extra compatibility), since
has known security vulnerabilities.
To enable High-Security HTTPS:
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
The Standard HTTPS Level
older TLS (Transport Layer Security) protocols,
while the High-Security Level
sion 1.2 exclusively.
Standard Mode
B r o w s e r S u p p o r t
Note that the High Security Level requires the use of current browsers - as of July 2016,
the oldest compatible clients include:
®
• Firefox 27
®
• Chrome 30
®
• Internet Explorer 11
®
• Safari 9.
(This is not an exhaustive list.)
1. Navigate to MANAGEMENT > Network
2. In the Actions Panel on the left, click on
Interface Settings
3. Click on the tab Security
4. Read the Caution
stated.
5. Check the box Enable High
allows the use of medium strength ciphers and
is restricted to strong ciphers and TLS ver-
is the default setting, the
window will open.
Level:
statement and verify that you meet the requirements
Security, and click Submit.
4.3 Managing Users and Security
High-Security Level
High Security
turns off TLSv1, which
Setup.
Web Interface Settings. The
is preferred
Web
297