Safran SecureSync 2400 User Manual page 537

The STL option card 1204-3E is configured via the SecureSync Web UI. See
SecureSync Web UI" on page 34
information.
To configure STL settings:
1. Log into the Web UI, and navigate to
0. The
2. In the STL 0
setup window.
In the STL 0 setup window, you can configure the following parameters:
Subscription
service in order to activate STL access.
Latitude, Longitude,
graphic position of SecureSync's STL antenna. For help determining
your actual position, see
Geolocation
[default]/Pseudo
SecureSync 2400 User Manual
STL 0 status window will be displayed.
status window, click on the
Key: [required] Enter the key obtained from customer
Mode: Static Known Position/Static Unknown Position
Static/Dynamic: This parameter refers to how the
for basic SecureSync setup and initial login
INTERFACES > OPTION CARDS: STL
Edit button to open the
Altitude: [decimal degrees, meters] Actual geo-
"Determining Your Position" on
APPENDIX
"The
STL 0
page 242.
521