Table of Contents
Advertisement
APPENDIX
a. After installation in slots 1 and 2, connect the supplied cable, part number
b. Using the supplied cable ties, secure the cable, part number 8195-0000-
384
Note:
The double-wide NENA card can only be installed in slots 1 & 2
on the SecureSync 2400.
8195-0000-5000, to the mainboard connector J19, pins 3 - 8.
Note: Pins 1 and 2 of connector J19 are not used:
Figure 5-13:
J19 Connector, seen from rear of unit.
5000, from the option card to the white nylon cable tie holder fastened to
the mainboard (see figure below).
Figure 5-14:
Cable routing
SecureSync 2400 User Manual
Advertisement
Table of Contents
Troubleshooting
