Safran SecureSync 2400 User Manual page 118

2.14 Configure Network Settings
Restoring the Default SNMP Configuration
To restore the SecureSync to its default SNMP configuration:
1. Navigate to the
2. In the
3. Confirm that you want to restore the default settings in the pop-up mes-
Configuring the SNMP Status
102
Passphrases. Clicking on the "+" symbol in the top-right corner
opens the SNMP V3 Screen. See
SNMP Traps: This panel allows you to define different SNMP
Managers that SNMP traps can be sent to over the network.
This allows for SNMP Managers in different geographical areas
to receive the same SNMP traps that Managers in other areas
also receive. Clicking the PLUS icon in the top- right corner
opens the SNMP Traps Settings Screen. See also
on page 108
2. The Actions panel, which contains the
figuration button.
3. The SNMP Status
An SNMP
An Authentication Error Trap
SysObjID—The System Object ID number. This is editable in the
SNMP Status panel (see
Contact
editable in the SNMP Status panel (see
Status" below).
Location— The system location. This is editable in the SNMP
Status panel (see
Description—A simple product description. This is not editable
in the SNMP Status.
MANAGEMENT > NETWORK: SNMP Setup
Actions panel, click the
ton.
sage.
and "Setting Up SNMP Notifications" on
panel, which offers:
ON/OFF switch.
"Configuring the SNMP Status"
Information—The email to contact for service. This is
"Configuring the SNMP Status"
Restore Default SNMP Configuration
CHAPTER
"SNMP V3" on page 106.
"SNMP Traps"
Restore Default SNMP Con-
ON/OFF switch.
"Configuring the SNMP
below).
screen.
•
2 SecureSync 2400 User Manual Rev. 5.2
page 269.
below).
but-