To add a user account:
CHAPTER
•
4
SecureSync 2400 User Manual Rev. 5.2
1. Enter a Username. (For rules, see
2. Enter a Password. The password requirements are configurable, see
"Managing Passwords" on the next
combination of upper- and lower-case characters. Minimum password
length = 8 characters, maximum length = 32 characters.
3. Repeat the new Password.
4. In the
Group
field, choose the permission group to which you want the user
to belong to:
user
to access and change all settings, with the following
ited to the
admin
Changing network settings
Adding and deleting user accounts
Web Interface Settings
Upgrading SecureSync system software
Resetting the SecureSync configuration
Clearing log files
Changing Disciplining Setup options
Changing configuration options for the following protocols or fea-
tures:
NTP
HTTPS, SSH
LDAP/RADIUS
SNMP (with the exception of configuring SNMP notifications).
"Rules for Usernames" on
page. By default a password can be any
or admin. The
user
permission level assigns permission
accounts:
4.3 Managing Users and Security
page 275.)
exceptions
that are lim-
277