Temperature Management - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

Temperature Management

SecureSync is equipped with one cooling fan, located behind the right-hand side

of the front panel, and several hardware temperature sensors, including:

Temperature readings are performed once per minute. The temperature data is

logged, and can be visualized via graphs integrated into the Web UI. The tem-

perature readings can also be used to control the fan. For details see below under

Temperature Monitoring

You can monitor the unit's measured temperatures actively by inspecting the

temperature graphs in the Web UI, or passively by setting up automatic alarm

Alarm notifications can be generated via SNMP Traps and Emails, as well as log

messages in the Alarm and Event Logs. The alarms may optionally be masked.

Also, it is possible to implement a delay by setting the number of times the

1/minute readings need to exceed a temperature threshold before an alarm is

Monitoring CPU and Board Temperature

Current readings for Oscillator/Board/CPU Temperature are displayed in the Sys-

tem Status panel, which can be accessed via the HOME screen, or via TOOLS >

System Monitor.

Board Temperature graphs are displayed under TOOLS > System Monitor:

SecureSync 2400 User Manual Rev. 5.2

To display a higher resolution graph for a shorter time span, move

one or both time sliders at the bottom of the graph inwards.

temperature near the CPU

the air temperature near the oscillator.

4.5 Quality Management