How To Configure An Input Reference - Safran SecureSync 2400 User Manual

2.19 Configuring Input References
2.19.1

How to Configure an Input Reference

To access the user-editable settings of an Input Reference, choose one of these
two methods:
Configuring the settings of an input reference, method 1:
1. Under
2. The Status window for the specific reference you selected will be displayed. Click
the Edit button in the bottom-left corner.
3. The settings window for the chosen reference will be displayed. Edit the field(s)
as desired.
Configuring the settings of an input reference, method 2:
1. In the
(white on orange), or an input reference category (e.g., "GNSS reference").
2. In the Status window, click the GEAR button next to the desired input reference.
3. The settings window for the chosen reference will be displayed. Edit the field(s)
as desired.
For more information, see
162
Note: The illustrations shown below are examples. The windows dis-
played in your Web UI may look differently.
INTERFACES > REFERENCES, click the desired reference.
INTERFACES > REFERENCES
"Managing References" on
drop-down menu, click
page 204.
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
REFERENCES