Safran SecureSync 2400 User Manual page 224

3.3 Managing References
2. Click and hold on the item whose priority you wish to reorder.
3. Drag the item up or down to the desired place.
4. Click
Resetting Reference Priorities to Factory Defaults
To reset all references in the Reference Priority table to their factory default pri-
orities:
1. Navigate to the
2. In the
3.3.1.2 The "Local System" Reference
The Local System reference is a "Self" reference, i.e. SecureSync uses itself as an
input reference for Time, or as a 1PPS reference. The Local System is a unique
input reference in that it can be used as either the Time reference, or the 1PPS ref-
erence, but never both.
208
Submit.
Configure Reference Priorities
> OTHER: Reference Priority
Actions panel, click the
screen via
menu.
Restore Factory Defaults
CHAPTER •
3 SecureSync 2400 User Manual Rev. 5.2
MANAGEMENT
button.