Safran SecureSync 2400 User Manual page 464

APPENDIX
The
MANAGEMENT/OTHER/Time Management page. The year value only needs to
be manually entered once, as it will automatically increment to the next year each
New Year's day. See
the current year manually.
Verifying IRIG Input Signal Validity
See: "Verifying the Validity of an Input Signal" on
IRIG Input: Status Window
To view the current settings of the IRIG Input (also referred to as 'Reference'), go
to its Status window. For instructions, see:
Settings" on
The Web UI list entries for these cards are: IRIG In/Out BNC and IRIG In/Out
Fiber. The connector number is: J1.
The Status window displays the following settings:
448
Note: When the IRIG Input year is updated,
from the Web UI NTP page (or the SecureSync unit rebooted) for the
New Year value to take effect.
current year value
"System Time" on page 188
page 363.
Reference ID: If you have only one IRIG card installed, SecureSync will num-
ber that card 0 and it will be identified as irg0. Additional cards will be
numbered irg1 or above.
NTP
can be manually
for instructions on how to set
page 367.
"Viewing Input/Output Configuration
must be restarted
entered from
SecureSync 2400 User Manual
the