Snmp V1/V2C - Safran SecureSync 2400 User Manual

2.14.8.1

SNMP V1/V2c

SNMP V1 is the first version of the SNMP protocol, as defined in the IETF (Internet
Engineering Task Force) RFCs (Request for Comments) number 1155 and 1157.
SNMP V2c is the revised protocol, but it also uses the V1 community based admin-
istration model.
Creating Communities
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
1. Navigate to MANAGEMENT > NETWORK: SNMP
2. In the SNMP V1/V2
3. The SNMP V1/V2c Settings for Access
4. Enter the required information in the fields provided:
The IP Version
IPv6 (= default).
The choices offered below will change in context with the choice
made in the
If no value is entered in the
the system default address.
SNMP Community
length.
Permissions
The Version
panel click the PLUS icon in the top-right corner.
field provides a choice of IPv4, IPV6 or both IPv4 and
IP Version field.
IPv4
names should be between 4 and 32 characters in
may be Read Only or Read/Write.
field provides a choice of V1 or V2c.
2.14 Configure Network Settings
Setup.
window will display:
and/or IPv6 field, SecureSync uses
105