Network Ports; Configuring Input References - Safran SecureSync 2400 User Manual

Saving your unique Pin Layout
Before you perform a clean upgrade or restore your unit's default settings, you
can choose to download your current pin layout settings.
(Note: The Save Layout option applies only to the pin configuration for the DCLS
BNC connector and the 15-pin I/O connector. To save your entire configuration
including these settings, see
page 340.)
2.18.4

Network Ports

The Network Ports can be configured under MANAGEMENT > Network Setup.
For more information, see
2.19

Configuring Input References

Depending on the type of input reference, some of its settings may be user-edit-
able. To access these settings for a given input reference, choose one of the two
methods described below.
(To disable references or change the priority that your timing system will be
guided by those references, visit
page 205).
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
A. Navigate to the MANAGEMENT: NETWORK > Pin Layout
B. In the Actions panel on the left, click
1. To save the current layout, navigate to the
Pin Layout screen.
2. In the Actions panel, click the
taining your current settings.
3. Save this file in a location of your choosing and perform any necessary
actions.
4. To restore your former layout, click the
Layout screen.
5. Choose the name and location of the file saved when using the Save Layout
function. Click the Upload button.
Reload
"Backing-up and Restoring Configuration Files" on
Save Layout
Upload Layout
"Configure Network Settings" on
"Configuring Input Reference Priorities" on
2.19 Configuring Input References
screen.
Layout.
MANAGEMENT > NETWORK
button to download a file con-
button in the Pin
page 73.
>
161