Default And Recommended Configurations - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

Default and Recommended Configurations

The factory default configuration settings were chosen for ease of initial setup.

However, some of the default settings may deviate from best practices recom-

mendations. The following table outlines the differences between factory default

and recommended configuration settings for your consideration:

Serial Port Available

* Safran recommends that secure clients use only SNMPv3 with authentication

for secure installations.

SecureSync 2400 User Manual Rev. 5.2

restarts the unit after the clear.

puts the unit in a halted stated after performing the clear.

4. Click on Submit to finalize the commands.

Default and recommended configurations

Default Setting

Enabled (using customer-generated certificate and key or default

Spectracom self-signed certificate and common public/private key

SSH/SCP/SFTP enabled with unit unique 1024-bit keys)

Enabled (with no MD5 values

Enabled (default private keys

4.7 Backing-up and Restoring Configuration Files

Recommended Setting

Disabled or Enabled (with SNMP

v3 w/ encryption*)

Enabled (use MD5 authentication

with user-defined keys)

Command Line Interface

Disabled (use SSH instead)

File Transfer

Disabled (use SFTP or SCP)