Safran SecureSync 2400 User Manual page 541

Serial Number: Receiver serial number.
IP address [button]: Maintenance port – opens a separate browser window indic-
ating the IP address of the Maintenance port (if a cable is plugged into the
MAINT. port). NOTE: This functionality is only required if Safran Trusted 4D Ser-
vice personnel request access to the STL receiver directly.
Strong Burst: Indicates color-coded burst rate. For more information see
Rate" below.
Latitude, Longitude, Altitude: Position data, as entered under
Settings" on
Geolocation Mode: Position estimation setting, as entered under
STL Settings" on
Sensitivity Level: STL receiver sensitivity setting, as entered under
STL Settings" on
Renewing Your STL Subscription
Contact customer service to obtain a new subscription key: US: +1 585 321 5800;
France: +33 (0)1 64 53 3980.
In the Web UI, navigate to INTERFACES > OPTION CARDS: STL0 > EDIT to
access to STL status panel. Enter your new subscription key.and click submit.
If your location information is different from your End User Agreement, please
contact customer service.
Confirm that your start date, end date, and subscription state have updated in
the STL reference panel.
Burst Rate
Satellites transmit the STL time and location data in bursts. The number of bursts
per minute that the receiver detects is the burst rate, but only strong bursts have
a quality high enough to be usable. Note that the burst rate changes over time
due to the movement of the satellites and other factors.
The current strong burst rate is shown in the STL 0 status window (described
above) and offers a good indication on the reception quality. Typically, a number
of received strong bursts per minute is greater than 60, the location has sufficient
STL service for the receiver to converge and provide a timing solution.
SecureSync 2400 User Manual
page 520.
page 520.
page 520.
APPENDIX
"Burst
"Configuring STL
"Configuring
"Configuring
525