Status Monitoring Of Input References - Safran SecureSync 2400 User Manual

4.5 Quality Management
Status Monitoring via the System Monitor Screen
To display status information pertaining mainly to SecureSync's current hard-
ware status, navigate to TOOLS > SYSTEM > System Monitor.
The information provided on the System Monitor Screen is subdivided into three
panels:
System Status panel
This is identical with the HOME screen
Disk Status panel
This panel displays:
The last item refers to system storage. If you need to update the System Soft-
ware, and this number is
in order to free up memory space. (Navigate to TOOLS > SYSTEM:
Upgrade/Backup, and click the corresponding buttons in the lower left- hand
corner.)
System Monitor panel
Graphs are displayed for:
To delete the logged data used to generate the displayed graphs, click the
TRASHCAN icon. (Note that re-populating the graphs with fresh data generated
at a 1/min. rate will take several minutes.)
To download the logged data in .csv format, click the ARROW icon.
4.5.1.3

Status Monitoring of Input References

SecureSync's input references can be monitored in real time through the
INTERFACES menus. The menus will populate dynamically, depending on which
references are available.
306
Total: [MB]
Used: [MB]
Free: [MB]
Percent: [%]
70% or
Board Temperature
Memory Used
CPU Used.
"System Status panel" on
higher, it is recommended to clear logs and stats
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
page 304.