Oscillator Logs - Safran SecureSync 2400 User Manual

The Oscillator History Panel
The Oscillator History Panel offers real- time graphical monitoring of
SecureSync's internal timing. The following graphs plot key oscillator- relevant
data over time::
You can zoom in on any of the graphs by grabbing the handles at either end and
pulling them inwards. The graph will focus in on the time interval you choose in
real time.
Clicking on the Delete icon in the top-right hand corner will erase all current oscil-
lator log data.
Clicking on the Download arrow icon will download the latest oscillator log data
as a .csv file.
3.5.4

Oscillator Logs

To export, or delete the oscillator logs:
CHAPTER •
3 SecureSync 2400 User Manual Rev. 5.2
Board temperature (measured on the main board, sometimes also
referred to as 'System temperature')
CPU temperature
Note:
History
CPU temperature can be found under
System
Last Time Reference
Last 1PPS Reference
Last TFOM Change: [Timestamp: Last occurrence]
Last Sync State Change: [Timestamp: Last occurrence]
Last Holdover State
Phase Error Magnitude: See
Frequency Error: See
Scaled DAC Value: See
Oscillator Temperature, which has an effect on oscillator accuracy, and
therefore can be used to interpret oscillator performance.
1. Navigate to MANAGEMENT > OTHER:
Oscillator temperature is plotted over time in the
panel on the right, while graphs for board and
Monitor.
Change: [Timestamp: Last occurrence]
Change: [Timestamp: Last occurrence]
Change: [Timestamp: Last occurrence]
1PPS Phase Error
10_MHz_Frequency_Error
DAC Step
Disciplining.
3.5 Managing the Oscillator
TOOLS > SYSTEM:
257