Safran SecureSync 2400 User Manual page 320

Hide thumbs Also See for SecureSync 2400:

Table of Contents

4.5 Quality Management

System Status panel

Reference—Indicates the status of the current synchronizing reference, if

Power—Indicates whether the power is on.

Status—Indicates the status of the network's timing. There are three indic-

ators in the Status field:

Sync—Indicates whether SecureSync is synchronized to its selected

input references.

indicates SecureSync is currently synchronized to its ref-

indicates SecureSync is not currently synchronized to

its references.

Hold—When lit, SecureSync is in Holdover mode.

Fault—Indicates a fault in the operation of the SecureSync. See

"Troubleshooting via Web UI Status Page" on page 354

tions for troubleshooting faults.

Status: If a major or minor alarm is present, it will be displayed here.

NTP—Current STRATUM status of this SecureSync unit.

Temperature—The current board temperature will be displayed here.

SecureSync 2400 User Manual Rev. 5.2

for instruc-

Troubleshooting