Safran SecureSync 2400 User Manual page 112

2.14 Configure Network Settings
Deleting Host Keys
You can delete individual host keys. To delete a key:
1. Navigate to
2. Select
Creating Host Public/Private Key Pairs
You may create individual Host Public/Private Key pairs. Host keys must first be
deleted before new Host Keys can be created. To create a new set of host keys:
1. To access the SSH setup screen, navigate to
2. Should you want to change the key length of any host key, enter the
3. Check the
4. Click Submit.
5. Delete any of the keys you do not want. See
96
Note: Changing the values and submitting them in this manner DOES
NOT generate new host public/private key pairs. See
Public/Private Key Pairs" below
host public/private key pairs.
MANAGEMENT > NETWORK: SSH
open to the Host Keys
Delete in the field for the key you wish to delete, and click Submit.
SSH Setup. The window will open to the
desired length in the text field corresponding to the length you wish to
change.
Regenerate All Keys
The Key Type/Status/Action table will temporarily disappear while the
SecureSync regenerates the keys. The Host keys are generated in the back-
ground. Creating RSA and DSA keys, each with 1024 bits length, typically
takes about 30 seconds. Keys are created in the order of RSA, DSA,
ECDSA, ED25519. SecureSync will generate all 4 host keys, RSA, DSA,
ECDSA, and ED25519.
Note: If the unit is rebooted with host key creation in progress,
or the unit is booted and no host keys exist, the key generation
process is restarted. The key generation process uses the pre-
viously specified key sizes.
for information on how to create new
tab by default.
Host Keys
box.
CHAPTER
2
"Creating Host
Setup. The window will
MANAGEMENT > NETWORK:
tab by default.
"Deleting Host Keys"
•
SecureSync 2400 User Manual Rev. 5.2
above.