Specifications; Input Power - Safran SecureSync 2400 User Manual

1.6 Specifications

Connector
DB-9
DB-25
RJ-12
RJ-45
SFP
SMA
1.6 Specifications
The specifications listed below apply to the SecureSync standard model, i.e. not
including any option cards, and are based on "normal" operation, with
SecureSync synchronized to valid Time and 1PPS input references (in the case of
GNSS input, this is with the GNSS receiver operating in Stationary mode).
Specifications for the available option cards are provided in their corresponding
topics; see
1.6.1

Input Power

AC power source:
DC power source (option):
24
Illustration
"Option Cards Overview" on
100 to 240 V , ±10 %, 50/60 Hz
AC
12-17 V -15%, +20%, or
DC
21-60 V -15%, +20%, secure locking device
DC
Electr. Signals
RS-232, RS-485
Differential TTL xV, RS-485
RS-485
Gb-Ethernet
Ethernet
RF, differential TTL xV, sine wave, pro-
gramm. square wave, AM sine wave,
DCLS
page 17.
CHAPTER •
1
Timing signals
ASCII time code,
GPS NMEA, data
clocks,
CTCSS fre-
quency,
1PPS, Alarm sig-
nal
STANAG
data clock,
CTCSS fre-
quency,
1PPS, Alarm
PTP timing signal
NTP timing sig-
nal, PTP timing
signal
1PPS, frequency
SecureSync 2400 User Manual Rev. 5.2