Safran SecureSync 2400 User Manual page 327

Monitoring all outputs of a specific type
To monitor all the outputs of a particular category (PPS, for example) sim-
ultaneously:
1. Navigate to
(not recessed e.g.,
2. The Status window will display a list of all outputs of the selected category:
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
To display more detailed information about a particular output, click the
corresponding INFO button.
To edit the settings of an output, click the GEAR button (see also
figuring Outputs" on
To refresh the information displayed, click the REFRESH button (circling
arrows icon on the right side of the screen).
On the rear panel illustration, click on an output connector to
list entry.
INTERFACES >
PPS Output):
To display more detailed information about a particular output, click the
corresponding INFO button.
page 169.)
OUTPUTS, and click the desired output category
4.5 Quality Management
"Con-
highlight its
311