Safran SecureSync 2400 User Manual page 434

APPENDIX
PIN
2
3
4
5
6
CTCSS and Alarm Outputs: Viewing Signal States
To quickly view the current signal state of the 1204-14 Simulcast outputs, in the
Web UI navigate to the option card's Status Summary panel. For instructions,
see: "Viewing an Input/Output Signal State" on
All outputs are listed, displaying their current output states. For a listing of the
states, see
puts: Edit Window" on
To view the settings of one of the Alarm Outputs or CTCSS Outputs, go to its
Status window. For instructions, see:
tings" on
The Web UI list entry for this card is named: Simulcast.
418
NOTES
5V = NORMAL MAJOR ALARM RELAY MAJOR ALARM RELAY
GROUND = ALARM
RS-485 + Terminal Output 3+
RS-485 - Terminal Output 3-
5V = NORMAL MINOR ALARM RELAY
GROUND = ALARM
Cable Shield GROUND
"CTCSS Outputs: Edit Window" on the facing
page 420.
page 363.
SIGNAL 938x SP360 Mapping
+ 1PPS
- 1PPS
MINOR ALARM RELAY
GROUND
page 366.
"Viewing Input/Output Configuration Set-
page, and "Alarm Out-
SecureSync 2400 User Manual