Safety; 1]: Unpacking - Safran SecureSync 2400 User Manual

3. Select one of the unused Slots as installation location for the new card. The
chosen Slot determines the installation procedure (see
the Installation Procedure" on
Prepare
4.
5. Connect
6. Replace chassis cover,
7. Log in to the SecureSync web interface;
tified.
8. Restore
above).
5.2.2.3

Safety

Before beginning any type of option card installation, please carefully read the
safety statements and precautions under
5.2.2.4

[1]: Unpacking

On receipt of materials, unpack and inspect the contents and accessories (retain
all original packaging for use in return shipments, if necessary).
The following additional items are included with the ancillary kit for the field
installation of option card(s). Some of the parts listed below will be required for
the installation (depending upon option card model, and installation location).
SecureSync 2400 User Manual
DANGER! SecureSync does not have an ON/OFF switch. It is
necessary to unplug the machine to remove power!
Caution: NEVER install an option card from the rear of the unit,
ALWAYS from the top, after removing the chassis cover.
slot (if required), and plug card into the slot.
any required cables and secure option card into place.
power on
SecureSync configuration (if it had been backed up before, see
page 371).
unit.
verify the installed card is iden-
"SAFETY" on page 45.
APPENDIX
"[3]: Determining
369