Safran SecureSync 2400 User Manual page 574

APPENDIX
list
loadconf
locallist
manifest
model
net
netnum
net4
net6
options
oscget
portget
portset
portstate
ppsctrl
priorset
ptpcfgload
ptpifaceset
ptpifacesetcfg
radius setretry
radius getretry
radius server list
radius server add
radius server del
558
Command
Outputs a list of commands
Restore a saved configuration and reboot
Used to display local clocks
See a list of all files
Displays the Serial Number of the unit
Displays network status
Displays the number of general-purpose network interfaces
Displays IPv4 network status
Displays IPv6 network status
Displays configured options installed (if any)
Displays the installed system oscillator
Display whether network port is enabled (for example, "portget
ETH2")
Enable or disable a network port:
"portset x on" where "x" is the port number (for example, "ETH2")
"portset X off"
Display the current state for a network port
Enable/disable individual 1PPS output signals
Sets the priority of an entry in the reference priority table
Copies specified file to PTP config location.
Enable or disable PTP on a specified interface.
Set the configuration of a specified interface from a file.
<value> Sets how many radius login retries will be attempted
<value> Gets the number of radius login retry attempts
Lists radius servers
<host> <port> <key> <timeout>
Adds radius server
<id> Deletes radius server number <id>
Description
SecureSync 2400 User Manual