1Pps In/Out [1204-28, -2A] - Safran SecureSync 2400 User Manual

Edge:
edge of the pulse.
Pulse Width:
Pulse Width is displayed in nanoseconds (ns). The default Pulse Width is
200 milliseconds.
5.2.3.2

1PPS In/Out [1204-28, -2A]

These 1PPS input/output cards provide one 1PPS input, and three or two addi-
tional 1PPS outputs on BNC or ST connectors for the SecureSync platform.
Model 1204-28 1PPS Input/Output: Specifications
Inputs/Outputs: (1) 1PPS input/(3) 1PPS output
Signal Type and
Input
Output Load
Rise Time to 90% of
Programmable Pulse
Absolute Phase
Programmable Phase
Maximum Number of
Ordering
Figure 5-19:
Model 1204-2A 1PPS Input/Output: Specifications
Inputs/Outputs: (1) 1PPS input/(2) 1PPS output
Operating Wavelength: 820/850 nm
SecureSync 2400 User Manual
Shows if the on-time point of the 1PPS output is the rising or falling
Displays the configured Pulse Width of the 1PPS output. The
Connector: TTL (BNC)
Impedance: 50 Ω
Impedance: 50 Ω
Level: <10 ns
Width: 100 ns to 900 ms with 20 ns resolution
Error: ±50 ns (1σ)
Shift: ±5ns to 500 ms with 5ns resolution
Cards: 6
Information: 1204-28: 1PPS 1-input/3-output, BNC connectors
Model 1204-28 option card rear plate
APPENDIX
391