Safran SecureSync 2400 User Manual page 125

SecureSync MIB to be generated. Refer to
mand details.
To define SNMP Traps (Notifications):
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
1. Navigate to MANAGEMENT > NETWORK: SNMP
2. In the SNMP Traps
3. The SNMP Traps Settings
4. Enter the required information in the fields provided. (Note that the options
will vary contextually according to your Version.)
5. The Version
default]
The Community
SNMP User
[v3]
Destination IP Version
v3]
Destination IP
word key to be sent. The default port is 162.
The UDP Port
"CLI Commands" on page 555
panel, click the PLUS icon in the top-right corner.
window will display:
field provides a choice between v1, v2c, and
field for the SNMP Community string.
names should be between 4 and 32 characters in length.
is a choice between IPv4 and IPv6.
is destination address for the notification and pass-
number used by SNMP Traps [default = 162].
2.14 Configure Network Settings
Setup.
v3
[v1, v2c]
[v1, v2c, v3]
for com-
[=
[v1, v2c,
[v1, v2c]
109