2.13 Accessing the Web UI
1. On a computer connected to the SecureSync network, start a web browser,
2.
3. Log into the Web UI as an administrator. The factory-default administrator
72
and enter the IP address shown on the SecureSync front panel.
When first connecting to the Web UI, a warning about security certificates
may be displayed:
Select Continue....
Note:
"Cookies" must be enabled. You will be notified if Cookies
are disabled in your browser.
Note:
HTTPS only:
tificate/security pop-up window may continue to be displayed
each time you open the Web UI until you saved the certificate
in your browser.
Note:
Static IP address only:
window from opening each time, a new
to be created using the assigned IP address of SecureSync dur-
ing the certificate generation. See
information on creating a new SSL certificate.
user name and password are:
Username: spadmin
Password: admin123
Depending on your browser, the cer-
To prevent the security pop-up
"HTTPS" on page 81
CHAPTER
•
2
SecureSync 2400 User Manual Rev. 5.2
SSL Certificate
needs
for more