Serial Port (Rear Panel); Usb Serial Port (Front Panel); Cables - Safran SecureSync 2400 User Manual

An SFP module found to NOT be supported: Arista SFP-1G-T
1.6.8 RS-232 Serial Port (Rear Panel)
Function: Accepts commands to locally configure the IP network parameters via
CLI for initial unit configuration.
Connector: RJ45
Character structure: ASCII, 115200 baud, 1 start, 8 data, 1 stop, no parity
1.6.9

USB Serial Port (Front Panel)

Function: Accepts commands to locally configure the IP network parameters via
CLI for initial unit configuration.
Connector: micro-B USB (requires installed driver; if your driver does not auto-
matically install, visit: https://www.ftdichip.com/Drivers/VCP.htm)
Character structure: ASCII, 115200 baud, 1 start, 8 data, 1 stop, no parity
1.6.10

Cables

CA08R-D500-0001
This cable option is available for purchase for the multi-I/O (15-pin) connector on
the front panel.
CHAPTER •
1 SecureSync 2400 User Manual Rev. 5.2
Avago ABCU-5741ARZ
Finisar FCLF8522P2BTL
Proline SFP-TX-CDW
Avago AFBR-5710LZ (available from Safran as SFP-FIBER-MM)
Finisar FTLF1318P3BTL (available from Safran as SFP-FIBER-SM)
1.6 Specifications
31