Safran SecureSync 2400 User Manual page 123

Creating Users
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
1. Navigate to MANAGEMENT > NETWORK: SNMP
2. In the SNMP V3 panel, click the PLUS icon in the top-right corner.
3. The SNMP V3 Settings
4. Enter the required information in the fields provided.
SNMP User Names
configured on the
User names are arbitrary. SNMP
between 1 and 31 characters in length.
The User Name
management station.
The Auth Type
The Auth Password
The Priv Type
vacy.
The Priv Passphrase
The Permissions
Read Only.
5. Click Submit. The created user will appear in the
window will display.
and passwords are independent of users that are
Tools/Users page.
must be the same on SecureSync and on the
field provides a choice between MD5 and SHA.
must be between 8 and 32 characters in length.
field provides a choice between AES, DES, and No Pri-
must be between 8 and 32 characters in length.
field provides a choice between Read/Write and
2.14 Configure Network Settings
Setup.
User Names should be
SNMP V3 panel:
107