Safran SecureSync 2400 User Manual page 562

APPENDIX
The output format used is selected among a small group of formats with the cap-
ability to output data at 5ns resolution. Event Broadcast Output formats are
detailed in
Event Broadcast [1204-23]: Specifications
Figure 5-66:
Output Port: Pin Assignments
Table 5-29:
Pin Number
Top row of 5 pins
1
2
546
captured while a message is being sent, it will be queued in the buffer until
the first message completes, then the next message will be sent.
If the Mode is set to Request, messages in the
when the Request Character is received.
"Event Broadcast Time Code Formats" on
Inputs/Outputs: (1) Event Trigger Input, (1) Event Broadcast Output
Signal Type and Connector:
Connector J1 – (RS-232 Output) RS-232 DB9F
Connector J2 – (Event Input) TTL BNC
Event Resolution: 5ns
Minimum Time Between
Message Buffer Size: 512 messages
Ordering Information: 1204-23: Event Broadcast
Model 1204-23 option card rear plate
Output connector DB-9: pin-out
Signal Name
NC
SERIAL_OUT_TX RS-232 Transmit data
Events: 20 ns
Function
No Connection
Message Buffer are only sent
page 552.
SecureSync 2400 User Manual