Safran SecureSync 2400 User Manual page 547

NEVER OUTPUTS
OUTPUTS ON MINOR ALARM
OUTPUTS ON MAJOR ALARM
Alarm Relay Output: Edit Window
To configure the Alarm Relay Output, go to its Edit window. For instructions, see:
"Configuring Option Card Inputs/Outputs" on
The Web UI list entry for this card is: Relay Output. The name of the output is:
Alarm Output [number].
Note:
10 MHz outputs start at 1, because of the built-in outputs).
The Edit window allows the configuration of the following settings:
Alarm
None: Will not output for an alarm.
Minor: Will output on a minor alarm.
Major: Will output on a major alarm.
Alarm Relay Output: Status Window
To view the current settings of an Alarm Relay Output, go to its Status window.
For instructions, see:
page 363.
The Web UI list entry for this card is: Relay Output. The name of the output is:
Alarm Output [number].
Note:
10 MHz outputs start at 1, because of the built-in outputs).
SecureSync 2400 User Manual
SecureSync starts numbering I/O ports with 0 (only 1PPS and
Type:
"Viewing Input/Output Configuration Settings" on
SecureSync starts numbering I/O ports with 0 (only 1PPS and
page 364.
APPENDIX
531