Reference Priorities: Examples - Safran SecureSync 2400 User Manual

3.3 Managing References
3.3.1.4

Reference Priorities: EXAMPLES

Example 1 – GNSS as primary reference, IRIG as backup:
In this use case, the objective is to use:
Step-by-step procedure:
1. Move the reference which has "GPS 0" in the
2. Move the reference which has "GPS 0" in the
3. Move the reference which has "GPS 0" in the
Since both of these references are default references, no additional references
need to be added to the Reference Priority table.
Example 2 – IRIG as primary reference, NTP input as backup
In this use case, the objective is to use:
Step-by-step procedure:
1. Move the reference which has "IRIG 0" in both the
2. Move the reference which has "NTP" in the
3. For all other references, uncheck the
Since both of these references are default references, no additional references
need to be added to the Reference Priority table.
212
GNSS as the primary Time, and 1PPS reference
IRIG as the backup Time, and 1PPS reference.
the 1PPS column to the top of the table, with a
Enabled checkbox.
the 1PPS column to the top of the table, with a
Enabled checkbox.
the 1PPS column to the top of the table, with a
Enabled checkbox.
IRIG as the primary reference input
Another NTP server as backup reference
0" in the 1PPS column to the top of the table, with a
the Enabled checkbox.
1PPS column to the second place in the table, with a
Click the Enabled checkbox.
disabled.
Time column and "GPS 0" in
Priority
Time column and "GPS 0" in
Priority
Time column and "GPS 0" in
Priority
Time
Time column and "NTP" in the
Enabled checkbox, so that they are all
CHAPTER •
3 SecureSync 2400 User Manual Rev. 5.2
value of 1. Click the
value of 1. Click the
value of 1. Click the
column and "IRIG
Priority value of 1. Click
Priority value of 2.