Safran SecureSync 2400 User Manual page 510

APPENDIX
ASCII Time Code Input: Status Window
To view the current settings of the ASCII Input (also referred to as 'Reference'),
go to its Status window. For instructions, see:
figuration Settings" on
The Web UI list entries for this card are: ASCII TIMECODE RS-232 and ASCII
TIMECODE RS-485.
The Status window displays the following settings:
494
Signature Control: Indicates whether Signature Control is enabled (Sig-
nature Control determines when the ASCII data stream will be enabled to
be present). See also:
Format 1: Indicates the configured format of the ASCII time code input data
stream.
Format 2: Indicates the configured format of the second consecutive ASCII
time code input data stream.
Format 3: Indicates the configured format of the third consecutive ASCII
time code input data stream.
page 363.
Reference ID: Indicates the letters used in the Input Reference Priority
table for this particular input reference.
Validity: Indicates whether the ASCII input data is present and con-
sidered valid for Time and 1PPS references.
A green
An orange
Leap Flag: Displays whether the incoming data stream is indicating that a
pending leap second is to be added to the UTC timescale at the end of the
month. See "Leap Seconds" on
"Signature Control" on
light indicates a valid reference.
light indicates the reference is not considered valid.
page 196.
page 183.
"Viewing Input/Output Con-
SecureSync 2400 User Manual