Rebooting The System - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

4.1 Powering Up/Shutting Down

3. Click Submit.

4. Wait 30 seconds after entering the HALT command before disconnecting

Issuing a HALT Command via SerialPort/Telnet/SSH:

With a serial connection to the front panel USB or rear panel serial port, telnet

connection or SSH connection, type halt <Enter> to halt the unit for shutdown.

For more information on SecureSync commands, see

Issuing a HALT Command via the Front Panel:

1. Press the POWER

2. Press DOWN until

Once you have halted your SecureSync, power must be removed (unplugged)

and reapplied in order to restart the unit.

Rebooting the System

To reboot SecureSync via the Web UI:

1. Navigate to

2. Select the

3. SecureSync will now be rebooted and be accessible again shortly there-

power from the unit.

After issuing the HALT command wait 30 seconds before you

remove power.

Power Menu. Verify that you are under the Management sub menu (use the

left and right arrow keys if necessary).

of the keyapd once to activate the halt, and then press it again to confirm

your choice in the confirmation menu to the right.

TOOLS > SYSTEM:

Restart after Shutdown

menu button to switch the front panel display to the

is highlighted. Press the ENTER button in the center

Reboot/Halt.

"CLI Commands" on

SecureSync 2400 User Manual Rev. 5.2