Backing-Up And Restoring Configuration Files - Safran SecureSync 2400 User Manual

4.7 Backing-up and Restoring Configuration Files
1. Save the license file license.tar.gz to a location on your PC (which
2. Open the SecureSync Web UI, and navigate to
3. In the
4. In the
5. In the
6. Refresh the browser window, and login to the Web UI again. Re-navigate to
4.7

Backing-up and Restoring Configuration Files

Once SecureSync has been configured, it may be desired to back up the con-
figuration files to a PC for off-unit storage. If necessary in the future, the original
configuration of the SecureSync can then be restored into the same unit.
The capability to backup and restore configurations also adds the ability to
"clone" multiple SecureSync units with similar settings. Once one SecureSync unit
has been configured as desired, configurations that are not specific to each unit
(such as NTP settings, log configs, etc.) can be backed up and loaded onto
another SecureSync unit for duplicate configurations.
340
needs to be connected to the same network SecureSync is.)
Actions panel, click
Apply License File
Upload File window, click
navigate to the location mentioned under the first step, select the license
file, and monitor the installation progress in the
until the application has rebooted.
Tools > Upgrade/Backup, and confirm that the newly installed Option is lis-
ted in the System Configuration
Apply License File.
window, click Upload New
Choose File. Using the Explorer window,
panel.
CHAPTER •
4
Tools > Upgrade/Backup:
File.
Status Upgrade window
SecureSync 2400 User Manual Rev. 5.2