Safran SecureSync 2400 User Manual page 572

APPENDIX
g. User accounts with "user" group permissions can perform "get" commands
clean
cleanhalt
clearcfg
clearlogs
clearstats
dateget
dateset
defcert
dhcp4get
dhcp4set
dhcp6get
dhcp6set
dns4cfg
dns4get
dns4set
doyget
doyset
fp_lock
fp_unlock
gettemp
gpsdop
gpsdserviceportget
gpsdserviceportset
556
but cannot perform any "set" commands or change/reset passwords. Only
user accounts with "admin" group permissions can perform "set" com-
mands or change/reset password. Refer to
User Accounts" on page 275
Command
Restores SecureSync configuration, logs, and stats to factory defaults
and reboots
Restores SecureSync configuration to factory defaults and halts
Restores configuration to factory defaults and reboots
Clears all logs
Clears all statistical data (NTP, and oscillator/disciplining)
Displays current date (for example, 15 APR 2015)
Used to set the current date
Used to create a new Safran self-signed SSL certificate for HTTPS in
case of expiration of the original certificate
Displays whether DHCP is enabled
Used to enable or disable DHCP
Displays whether DHCPv6 is enabled
Used to enable or disable DHCPv6
Display the configured IPv4 primary and secondary DNS addresses
Displays the configured DNS servers
Used to configure the DNS servers
Used to obtain the current Day of Year
Used to set the current Day of Year
Lock the front panel (admin access required)
Unlock the front panel (admin access required)
Displays the temperature of the oscillator, board, or CPU
Displays GNSS receiver positional accuracy estimates
Displays the GPSD service port
Sets the GPSD service port
"Adding/Deleting/Changing
for user account setup information.
Description
SecureSync 2400 User Manual