Safran SecureSync 2400 User Manual page 261

About QZSS
QZSS is disabled by default. In order to receive QZSS signals, you must either be
located in the Japan region, or use a GNSS simulator (such as Safran GSG-5 or -6
Series).
QZSS is not considered a standalone constellation and while SecureSync allows
you to enable QZSS by itself, it is recommended to use it in combination with
GPS.
Determining Which GNSS Satellites Are Received
To see which GNSS satellites your SecureSync is currently receiving:
CHAPTER •
3 SecureSync 2400 User Manual Rev. 5.2
Note:
stellations, you will receive a Constellation Error once you
click Submit (ConstError).
1. Navigate to INTERFACES > REFERENCES: GNSS
2. The GNSS 0 status window will open:
Should you select more than 3 + QZSS con-
3.3 Managing References
0.
245