Configure Network Settings - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

Number of login attempts

The number of failed login attempts for ssh is hard-set to (4) four. This value is

not configurable.

The number of failed login attempts for the Web UI (HTTP/HTTPS) is hard-set to

(5) five failed login attempts, with a 60 second lock. These two values are not con-

To continue with the configuration, see e.g.,

To learn more about setting up different types of user accounts, see

User Accounts" on

Configure Network Settings

Before configuring the network settings, you need to setup access to SecureSync

web user interface ("Web UI"). This can be done by assigning a static IP address,

or using a DHCP address. For more information, see

Once you have assigned the IP address, login to the Web UI. For more inform-

To configure network settings, or monitor your network, navigate to

SecureSync's Network Setup screen.

To access the Network Setup screen:

SecureSync 2400 User Manual Rev. 5.2

default credentials, see:

4. Upon initial login, you will be asked to register your product. Safran recom-

mends to register SecureSync, so as to receive software updates and ser-

vices notices. See also

"Accessing the Web UI" on

MANAGEMENT > Network

is divided into

For security reasons, it is advisable to change the

"Managing Passwords" on

"Product Registration" on

2.14 Configure Network Settings

"The Web UI HOME Screen" on

"Setting up an IP Address"

Network Setup