4]: Slot 1 & 2 Installation - Safran SecureSync 2400 User Manual

APPENDIX
5.2.2.7 [4]: Slot 1 & 2 Installation
Option cards installed in Slot 1 or Slot 2 sit on top of and are screwed into pre-
installed standoffs and plug in to the unit through the included ribbon cable.
Instructions for installing an option card into one of the slots above the CPU
board (1 or 2):
a. Safely power down the SecureSync unit and remove the top cover of the
b.
c. Unscrew and remove the blank option card plate from the back of the unit
d. Insert option card into the slot, lining up the screw holes on the card with
374
Steps 4 through 10 of this installation procedure should only be per-
formed if your installation location or card requires it.
main chassis (housing). Save the screws.
DANGER!
must unplug the machine to remove power!
Caution: NEVER install an option card from the rear of the unit,
ALWAYS from the top, after removing the chassis cover.
(or the existing option card). Save the screws.
the standoffs..
SecureSync does not have an ON/OFF switch. You
SecureSync 2400 User Manual