Adding/Removing A Radius Server - Safran SecureSync 2400 User Manual

4.3.5.2

Adding/Removing a RADIUS Server

To add a RADIUS authentication server, or remove a server from the list:
CHAPTER •
4 SecureSync 2400 User Manual Rev. 5.2
3. Click the ON/OFF
ture.
4. If you are enabling the service, in the
number of retries for SecureSync to communicate with the RADIUS server
(default = 0).
5. Configure the Default User Group
missions level (Admin or User)
6. Click Submit.
1. Navigate to MANAGEMENT > OTHER:
2. In the Actions panel on the left, click
window will be displayed:
toggle under Enable RADIUS to enable or disable the fea-
Retransmit Attempts
to select your preferred default user per-
RADIUS
4.3 Managing Users and Security
Authentication.
Setup. The RADIUS Setup
field, select the
291