Safran SecureSync 2400 User Manual page 63

SAFETY: User Responsibilities
SAFETY: Other Tips
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
DANGER! — GROUNDING:
This equipment must be EARTH GROUNDED.
This product is grounded through the power supply. There is an addi-
tional, supplementary chassis ground on the rear panel.
Never defeat the ground connector or operate the equipment in the
absence of a suitably installed earth ground connection. Contact the
appropriate electrical authority or an electrician if you are unsure that
suitable earth grounding is available.
DANGER! This unit might have more than one power supply con-
nection. All connections must be removed to de-energize the unit
Caution: Electronic equipment is sensitive to Electrostatic Discharge
(ESD). Observe all ESD precautions and safeguards when handling
Safran equipment.
The equipment must only be used in technically perfect condition. Check
components for damage prior to installation. Also check for loose or
scorched cables on other nearby equipment.
Make sure you possess the professional skills, and have received the train-
ing necessary for the type of work you are about to perform.
Do not modify the equipment.
Use only spare parts authorized by Safran.
Always follow the instructions set out in this User Manual, or in other Safran
documentation for this product.
Observe generally applicable legal and other local mandatory regulations.
Keep these instructions at hand, near the place of use.
Keep your workplace tidy.
Apply technical common sense: If you suspect that it is unsafe to use the
product, do the following:
2.4 SAFETY
47